Best Rated Winches for Jeep Wrangler

If you are into the off-roading experience and own a Jeep Wrangler, you probably have a winch and winch plate with you handy at all times in order to deal with any accidents. The last thing you want is to be stuck in a pothole or ditch with no help unless there is a winch to help you out. This compact piece of machinery does what most large jeeps simply cannot do on their own. Even if you do not use it often (thankfully!), a winch for your jeep is definitely something you shouldn’t be driving without.

Reviews of the Best Winches for Jeep Wrangler

Reviews of the Best Winch Plates for Jeep Wrangler

**Below, you’ll find our more detailed reviews, but you can also click the links above to see current prices or read customer reviews on Amazon.

 

How Do Winches and Winch Plates for Jeep Work?

A winch is a mechanical device which is used for pulling in, letting out or adjusting the tension of a rope or cable attached to a vehicle or machine.

Winches are generally of two types, electric and hydraulic. The main difference between the two types is the duty cycle.

The electric one is powered by an electrical system which does not have a power supply for using continuously but can provide at least five minutes of nonstop pulling power even with a dead engine. The hydraulic one is powered by a steering pump and works as long as the engine is running.

In the electric motors that are used for winches, there are two types, permanent magnet motors and series-wound motors. The former use strong magnets for the stator and are equipped with an armature with copper coils that are used for the rotor. The series-wound motors use coils in place of the permanent magnets and are, thus, more reliable.

Things to Consider When Buying Winches and Winch Plates for Jeep

Winches are extremely useful if you are stuck somewhere. If you have a fully-functioning winch at hand, there is no need to get any outside help and you will be good to go in no time. You have to, however, make sure your winch works effectively and is good enough to take you out from where you are stuck. Thus, you must make sure your winch is used for the kind of vehicle you are driving.

There are various factors which you must consider before buying a winch for your vehicle. Apart from the very obvious factors, such as which vehicle it is for and what brand should you get, there are other factors which should influence the decision you make.

You do not invest in a winch and winch plates often, so when you do, you must make an informed choice by keeping the following considerations in mind.

Line Pull Rating

This is probably the most important factor to consider when you are choosing a winch for your Jeep Wrangler. This rating refers to a combination of the line’s tensile strength and the mechanical capacity of the winch, which is based on the first layer of the cable of the winch. In order to get the right pull rating for your jeep, you would need to multiply its GVW (gross vehicle weight) by 1.5.

Line Length

This is yet another factor that you must consider when deciding to buy a winch. The more line you have on your drum, the farther you will be able to reach. Once you have chosen the pull rating of the winch, you would need to get a long rope in order to acquire the maximum pull.

A long line, however, can get snarled up and kinked, so you would need to be careful about that. That is why many people prefer to go for a shorter line and have at least a 50-foot line extension, especially if using a winch rope that is not made of wire but synthetic. You can have around 100 feet of line on the drum along with a 50-foot extension.

Line Speed

When the vehicle is being recovered, most people find slow lines quite irritating. When it is unloaded, most winches are quite fast, but when they are under load, they become slow. Most of the winches have a pull speed of around 2-5 meters per minute when they are under load, which is usually not the same as when it is unloaded. What you need to do is determine what your level of patience is when it comes to unspooling and decide on a line speed accordingly. However, winches that are faster would require more electric power.

Your Budget

Your budget is obviously one of the most important considerations you must keep in mind when deciding on which winch to purchase. The best winch is the one that you can easily afford. A winch with a synthetic rope may be stronger, safer and more flexible, but it is also usually more expensive than the winch with a steel cable. Most types of winches will get your job done, provided that they are in good condition and well maintained.

Electrical or Hydraulic

Another consideration is which type of winch is the right one for your Jeep Wrangler, hydraulic or electric. Electric ones are generally more common, inexpensive and widely available. They are also easier to install as compared to the hydraulic ones and often have more features than their counterparts.

 

Top 5 Best Winches for Jeep Wranglers

Keeping all of the above factors in mind, we have reviewed the best-selling and most popular winches for the Jeep Wrangler that will help you choose the best one for your Jeep.

1.  Smittybilt 97495 XRC Winch – 9500 lbs Load Capacity

The most attractive feature of this winch is the fact that it boasts an unbelievable strength of 9,500 pounds, which is more than enough to pull out your Jeep Wrangler or even truck from the muck. The motor is extremely solid with a horsepower of around 6.6, which means this winch is the ideal choice for jeep owners and for the Jeep Wrangler in particular.

This winch is also quite popular with customers as most of them have praised it for being powerful and able to pull heavy trucks and jeeps from ditches. Many customers, however, have commented on the price is quite high.

Key Features

  • Waterproof

This is a must-have feature in a winch. This Smittybilt winch has an amphibious motor, which is needed to get your jeep out of a pothole which is generally filled with water. It has an IP67 waterproof rating.

  • Corded Remote

This winch is equipped with a corded remote that allows the user to operate the winch without having to tread in the water.

  • Easy Installation

Installing this winch is quite easy and simple. It comes with a startup kit which includes everything, including wiring. The operation of the winch is also quite straightforward.

 

2.  Smittybilt 98510 X2O Waterproof Synthetic Rope Winch – 10000 lb Load Capacity

This is yet another great winch from Smittybilt, which is a well-known and reputable company for winches. This is a great winch for a Jeep Wrangler due to its high performance and trouble-free operation.

The best part about this winch is that it can be mounted on two different locations, so you can choose the one that is more suited to your needs. It also comes with a remote which can be wired or even used wirelessly. Most of the people who have used this winch have praised its quick and easy installation as it simply needs to be put on the vehicle with the cables already installed.

Key Features

  • Wireless Operation

It includes a wireless remote which the user can operate as wired or wireless. It has a 12-foot lead and works easily under two different configurations, allowing the user to pull the jeep from a safe distance. Moreover, it provides a high horsepower of 6.6 along with a three-stage planetary gear train that is very fast and is able to pull out a Jeep Wrangler in no time.

  • Quick and Strong

With a fast speed and a line pull of 10,000 pounds, this winch offers a remarkable performance every time. It features a 218:1 gear ratio that is matched by a sliding ring gear clutch along with an out-of-drum braking system which is automatic.

  • Additional Features

This Smittybilt X20 winch has a hawse fairlead, which is able to reduce the wear and tear that takes place on a synthetic rope and keeps it from binding. Moreover, it is equipped with a cable that can easily pull up to 98.5′ and has a waterproof rating of IP68.

 

3.  Warn 95950 ZEON 12-S Winch

Warn is one of the most popular names in the off-roading industry. It has been in business for more than fifty years with exceptional performance and quality. This winch features an 80′ Spydura Pro synthetic rope with a 12,000 lbs. capacity, which is perfect for big vehicles like a Jeep Wrangler.

Customers generally praised the winch’s ability to move heavy vehicles and its long warranty of seven years. This winch is ideal for big jobs and tough rescues.

Key Features

  • Strong and Fast

It has a high-speed motor with strong gears and a heat-treated ring hear that is able to deliver fast line speed and high efficiency. Moreover, it has a convertible control pack which can be attached to the winch or mounted, which supports different mounting options and looks.

  • Wireless Remote

The wireless remote provides complete control. The remote is advanced and sophisticated and provides information about the battery charge. It is accompanied by a USB charging cable and a charger adapter.

  • Waterproof

The winch is waterproof with IP68 rating, which is the highest rating for SUVs.

  • Stylish Design

It has a unique style with a symmetrical design that gives this winch a capable and strong look.

 

4.  LEDKINGDOMUS Rock Crawler Front Bumper for 87-06 Jeep Wrangler with Winch Plate

This is just a one-piece welded design that is able to provide your Jeep Wrangler with the ultimate strength for all your off-roading adventures. The best part about this bumper and winch plate is that it can easily fit the models of Jeep Wrangler from 1997 all the way to 2006, so you do not have to upgrade your winch plate and bumper when you upgrade your car.

Key Features

  • Sturdy

This bumper and winch plate design is quite strong and sturdy with the winch having a capacity of 12,000 lbs. Since it is made of cold rolled steel sheet and tubing, it can withstand almost anything.

  • Long Lasting

This product is made with high-quality materials and design with a pre-coating and a textured black powder coating which provides resistance against corrosion.

 

5.  OFFROAD BOAR Synthetic Rope Waterproof Winch

This winch is equipped with great features and comes with the tools needed to install it easily. It is a great choice for those who live in cold locations as it is durable and functional enough to last through the cold weather. Moreover, it is equipped with all the features you could need such as a waterproof design with an IP67 rating. Most of the customers who have used this winch are quite satisfied with its performance and how it is able to pull heavy vehicles, especially a Jeep Wrangler.

Key Features

  • Efficient Motor

This winch has quite an efficient and powerful series-wound motor and has one of the highest quality hooks with a four-way roller fairlead.

  • Automatic Brakes

It is equipped with an automatic braking system, thus ensuring your protection at all times.

  • Wireless Remote

This winch has a wireless remote along with a hand controller which provides ease of navigation.

 

Top 5 Best Winch Plates for Jeep Wranglers

 

1.  EAG 07-18 Jeep Wrangler Winch

The best part about the EAG 07-18 Jeep Wrangler Winch is that it provides heavy-duty construction, which makes it highly durable and long lasting. This front bumper has tolerances from 5/32″ thick mild steel sheet and about 2″ x 0.120″ tubing of steel which provides superior durability and extra strength.

The bumper which is equipped with a winch is also quite good looking and has a high-quality textured powder coat, which provides protection from corrosion. It is a great option for your Jeep Wrangler. Most users have praised this bumper in their reviews for being easy to install and being strong and sturdy.

Key Features

  • Ideal for Off-Roading

This bumper comes with 9,500-lbs. D-rings on the mounts and has a sturdy tube over the rider. It also includes washers and black isolators. The winch plate on the front bumper is capable of supporting about 12,000 pounds of a winch, which can be useful if you ever need it.

  • Easy Installation

The process of installation is quite simple. The packaging includes all hardware items which are necessary and comes with instructions that are easy to follow.

  • Improved Field of Vision of Fog Lights

The bumpers reposition the factory fog lights to increase their field of vision.

 

2.  EAG Jeep Wrangler JK Full-Width Front Bumper with Fog Lights Hole & Winch Plate

This is yet another great design of a front bumper from EAG, which is one of the most renowned companies when it comes to off-roading. It includes everything that you may require if you decide to go off-roading in your Jeep Wrangler. It has a front bumper that includes a built-in winch plate and pre-machined attachment points for easy installation of OEM size fog lights.

Most of the customers who are using this product have commented on its great performance, but many others have been disappointed with the durability of this bumper and winch as they claim it starts rusting soon.

Key Features

  • Great Packaging

The product is well-packed when it is shipped. There are good padding and extra foam on the sharp parts and edges as well as on the package which ensures there is no damage.

  • Value for Money

This front bumper with the winch plate provides value for money since it is quite affordable as compared to other brands. Plus, it provides two benefits in one, that is, protection against collision by having a strong front bumper and providing a winch to pull you out if the need arises.

  • Performance

This product is a high-performing bumper and winch and has the ability to pull out a Jeep Wrangler from any ditch or hole quite easily as it can bear a load of up to 12,000 lbs.

 

3.  Restyling Factory Front Bumper with Winch Plate for Jeep Wrangler JK

This is yet another great design of a front bumper that is equipped with a winch plate along with space for fog lights. Restyling Factory is a known brand name and offers quite useful products for any off-roading trips for your Jeep Wrangler. This design offers maximum tire clearance and will fulfil all your needs.

Key Features

  • Easy Installation

The process of installing the front bumper is quite easy as it includes everything you require in the package along with instructions which are quite easy to follow.

  • Strong and Durable

It uses powder-coated steel to make the bars and plates, which makes the product sturdy and long-lasting. It also has a convenient bolt-on design.

  • Useful Winch

Not only is it great looking and sturdy, but the winch is also very useful as the winch plate can bear a capacity of at least 12,000 pounds.

 

4.  Restyling Factory Full-Width Front Bumper with Winch Plate

Restyling Factory provides a high-quality and long-lasting support for off-roading expeditions with its reliable bumpers and winches. Its products make sure you have fun on your trip and don’t have to worry about getting stuck. This bumper with winch plate is ideal for Jeep Wranglers from 2007 to 2018. The best part about it is that it provides a full front width for maximum protection, so you can drive around in your jeep without any worries.

Key Features

  • Sleek Design

The design and style of this bumper and winch plate are sophisticated with a textured black finish. Its style is a classic and will appeal to almost everyone.

  • High Strength

It provides high strength and durability, and the winch can easily accommodate a weight of 12,000 lbs. easily.

  • Additional Features

It also has space for fog lights and has D-ring mounts welded inside and outside the bumper. Plus, it comes with 4.75 T D-rings as well.

 

5.  Razer Auto Rock Crawler Front Bumper with Winch Plate for Jeep Wrangler JK

This is yet another great brand for a front bumper and a winch plate. Made with a sleek and stylish design, it makes your Jeep Wrangler looks tough and rugged while providing maximum protection. It is equipped with two light tabs on the pre-runner hoop which is for off-road lighting. Hence, it makes sure you have full visibility on all your adventures and do not get stuck anywhere.

Key Features

  • Easy Installation

The process of installing this bumper is quite easy with no welding required and can be done without any professional help.

  • Strong and Sturdy

The bumper provides maximum protection against any impact or accident since it is made of high-quality materials and steel coating.

  • Useful

It has a winch plate which is built in and can bear 12,000 lbs. capacity. Thus, it can easily lift your Jeep Wrangler in case you ever need to. It also has space for easy installation of fog lights.

 

6.  EAG Jeep Wrangler TJ Front Bumper & Winch Plate

If you are looking for the ultimate strength and a sturdy design, this EAG 97-06 Jeep Wrangler TJ Front Bumper & Winch Plate is the best choice for you. It is manufactured from 5/32 inches of cold rolled sheets of steel and has 2″ x 0.12″ tubing of steel. There are also D-rings which are welded inside the bumper as well as on its outside in order to provide better strength.

There is also a built-in winch plate which has a 12,000-lbs. winch capacity. The best part is that no welding or cutting is required for putting on the bumper on your Jeep Wrangler.

Key Features

  • Sturdy and Durable

This front bumper with a winch is made up of high-quality materials and is the best choice for Jeep Wranglers. It is made to withstand anything that gets in its way.

  • Classic Design

It has a great design along with providing high-quality performance. It has a classic design with a twist of modern features. The front bumpers are made for direct bolt-on upgrades using simple hand tools. Hence, there is no lengthy installation either.

  • Protects Against Damage

The front bumper is able to serve two purposes. Not only does the winch on the bumper come in handy if there is ever a need for it, but the front bumper also provides the user protection against any impact or injury due to a collision.

 

Final Verdict

This buying guide for winches for a Jeep Wrangler is quite useful. Once you have gone over this, you can be ready to purchase a winch for your jeep before you head out on an adventure. The best one is always the one that offers easy installation and is easy to operate as well. It is no doubt a daunting task to shortlist the best one, and we hope we have helped you in this endeavour with our buying guide and reviews of some of the best winches.

We have also picked the top two models out of them all. The number one is the Smittybilt 97495 XRC Winch, which is ideal for Jeep Wranglers due to its reliability, durability and strength of pulling up to 9,500 lbs. of weight easily! The number one winch plate that we found worth buying is the EAG Jeep Wrangler Winch Plate, which is no doubt another amazing brand for winches. This one has everything that one needs from a winch plate coupled with a front bumper that kills two birds with one stone. Powerful, strong, durable, easy to use and install – this one has all the relevant features that is needed for a fully-functioning winch for a Jeep Wrangler.

Best Rated Truck Winches

A truck winch is an essential device that is equipped with a truck for hauling or lifting purposes. It is a device that everyone has seen but technically has no idea about it! The truck or the vehicle that it is attached is called the recovery vehicle. Most of the modern winches that are available nowadays include a cable or a rope which is incidentally powered by a motor.  A situation may arise when you find yourself stuck in a case where the need to haul a massive object out of a ‘muddy’ situation arises.  The chances are that the intervention of human strength is impossible in that situation, so the winch is the answer to your misery. The winch assures that you never have to wait for a tow truck in the middle of nowhere!

Reviews of the Best Truck Winches

**Below, you’ll find our more detailed reviews, but you can also click the links above to see current prices or read customer reviews on Amazon.

 

How Do Truck Winches Work?

Speaking from a practical point of view, the winch is a versatile device which can not only support trucks but can support jeeps as well as larger vehicles. The parts that make up a winch are its motor which will be equipped with its cable or rope of any material, the gear train for running the whole motor and the drum. The cable of the winch can have a length of anywhere from 40 feet to 150 feet. The shape of the winch is circular which allows the wire to wrap around it because of its geometry. And the drum includes a spool as well for wrapping the cable in and out.

The motor of the winch is the driving force for turning the drum. This action helps in wrapping the cable by itself to the winch drum. Though not all of the traditional winches have their motors, some people like to modify on their own, and some are satisfied with the manual crank that comes with it. The gear is useful for providing the torque to the motor so that it can perform the hauling action by itself without any human intervention!

 

Things To Consider When Buying A Truck Winch

Generally speaking, if anyone is an owner of a truck, there is a 95% chance that the truck was bought for performing heavy duty jobs. Like the ones that are usually involved in tree pulling or acting as recovery vehicles. If that is the case, you are probably looking for a winch that provides you with all the necessities. Every truck owner has their agendas in mind, and depending on the built and size of their vehicles, the choices for winches would vary. But before stepping into the store, there are four rules to consider before you install one of those devices onto your truck!

Quality of the cable:

Most of the modern winches that are available in the market come with their cables to the motor. Usually, they come in two variants, and that is synthetic and steel. Of course, everybody will have their preferences, but most users have a leaned towards synthetic cables. Synthetic cables are more flexible, and they have high tensile strength. It does not need any maintenance and is safe for bystanders in case there is breakage. Synthetic cables can pull up to a massive weight of 9500 pounds. If your motor comes with its cable, they can be replaced with synthetic cables in easy steps.

Seal proof:

The fact that you are getting a winch installed is a tell-tale sign that you will be involved in harsh terrains and be getting your hands dirty with jobs that are not delicate. It is important that the motor is protected from all kinds of external and natural factors to avoid it from malfunctioning in the middle of a job. Dysfunction of a motor has also resulted in various on-site accidents, so as a duty to yourself, it is mandatory that you get a winch with a motor that is sealed. Having a sealed motor protects it from snow, rain, mud and even moisture which are often the basis for creating corrosion on the metallic parts. So if you are aiming to buy smart, follow this advice.

Pulling Capacity:

Accidents often occur when the winch is involved in pulling weights that are larger than its capacity of pulling. The next thing that happens is that the cable snaps and inertia take its course. This sort of event ends up damaging more stuff, and in some unfortunate cases, there could be human casualties. So, while you are considering buying a winch for your truck, it is good to invest an extra amount of money and purchasing one that has a high weight pulling capacity. Customers usually get one that can pull 6500 pounds and above.

Easy accessibility:

Again, I would stress on spending an extra amount of money while investing on a truck winch. Some truck winch does not come with additional accessories like the spool in the drum or remote controllers for activating and deactivating the winch. There are good quality models that come with all the accessories required for operating the winch along with detailed manuals. So it is advisable that the winch is user-friendly, easy to install and work as well as cost-effective.

 

Top 12 Reviews of Best Truck Winches

Hopefully, the points mentioned above have given you an idea of what type of winch you would want to install on your truck. And I have made a list of the 12 best truck winches in this article. So, read through them and pick out one that you find it best for your truck.

1.  Smittybilt 97495 XRC Winch – 9500 lbs Load Capacity

This model is one of the best mid-range winches that you could get in the market out there. It is super reliable and can perform very well under pressure. It is a heavy duty device that is cost-effective as well a satisfactory for customers. I may as well add that this is one of the best winches that you could purchase at this price because it is waterproof as well. Thre are not a lot of winches that are waterproof at this price.

The key features are:

Construction:

The motor runs on 6.6 horsepower. The gear system has an impressive three gear system which is a planetary type. The motor also has a 500 Amp solenoid attached to it.

Water-resistant:

As I have mentioned earlier the motor is waterproof and has an IP67 rating, which is quite impressive.

Easy accessibility:

Nobody likes to run around to purchase extra parts for the new device. Therefore, this Smittybild device arrives with all the parts and wiring required for installation. In this case, this is a relief for most and goes a long way toward saving some extra money.

Service:

Smittybild has offered a lifetime warranty for all the steel products. Now that has ensured my confidence in this product.

 

2.  Superwinch 1135220 Terra 35 Winch – 3500 lbs Load Capacity

The Superwinch Terra is a monster in itself because it has the capacity of pulling a weight over 3500 pounds. With this winch, any truck owner would be confident of it enough to show it off. This is also one of the best winches out there that is within the mid-price range. On top of that, it performs to the fullest without any complaints.

The key features are:

Efficiency:

This is a winch that does not lack in efficiency because the motor is fitted with a permanent magnet. This makes the motor a thing of a heavy duty machine which is not expected to fail at all.

Ergonomic design:

The motor has a free spooling clutch for easy access to the cable. The steel wire cable has a 50 inch of 13/64 inch wire rope, which is the right amount for pulling heavyweights.

Construction:

The gear is made up of the highest quality steel, and they are twice as big as the contemporary gears that are available in the market. The bearings of the gear are oiled bronze.

Protection:

The solenoid is sealed and protected from all external factors which are connected to a fairlead for the motor. The circuit breaker is also protected as well.

 

3.  X-BULL 12V Steel Cable Electric Winch – 12000 lb Load Capacity

The winch does not break under pressure at all even if it under the stress of pulling a 12000-pound weight. Yes, you heard me right, this model has a weight pulling capacity of over 12000 pounds, and that is one of the selling points for a winch. Besides that, this winch is also super affordable. And that would make this a strong combination of the two best attributes.

The key features are:

Remote Controllers:

This product includes two remote controllers which are hand-held as well as waterproof. I do not know how this winch can get better than this. The hand controllers allow the user to operate the winch from a safe distance getting him or her out of harm’s way

User-friendly:

The motor is connected to a clutch. While of course, the motor can e operated from one of the given hand controllers, a spool is attached to the clutch as well. His free spool allows the user to manually turn the cable in or out in case there is a problem.

Capacity:

This winch weighs about 60 pounds only, but it is a stark contrast to how much weight it can haul. The motor has an inbuilt cable made out of stainless steel which is out 26 meters long.

Water-proof and corrosion resistant:

And the last feature which is the best of all, the winch is water resistant as well as anti-corrosive.

 

4.  Smittybilt 98512 X2O Waterproof Synthetic Rope Winch – 12000 lbs Load Capacity

The Smittybilt is built for state-of-the-art performance, and it is one of the most practical systems for every winch owner. This model has a large capacity and is built to overcome any task. With a great set of features, this version of a Smittybilt winch is a must-buy for all potential winch buyers who are into affordability as well as performance.

The key features are:

Construction:

The motor runs on 6.6 horsepower. The gear system has an impressive three gear system which is an epicyclic type like the other Smittybild winch that is listed at the top. Besides that, the drum for the gear produces lesser heat which is about 50% lesser than most contemporary winches that are available in the market

Water-resistant:

The motor is also waterproof and has an IP67 rating, which is quite impressive. This attribute leads to long-lasting usage and longer shelf life.

Easy accessibility:

Nobody likes to run around to purchase extra parts for the new device. Therefore, this Smittybild device arrives with all the parts and their synthetic line required for installation. In this case, this is a relief for most and goes a long way toward saving some extra money.

Service:

Also, like the previous Smittybild winch listed above, Smittybild has offered a lifetime warranty for all the steel products in this model as well.

 

5.  Master Lock Electric Portable Winch – 12Volt DC Electric Winch

This model is one of the most versatile units in this list. Not only is this designed for trucks, but you can attach it to a variety of other vehicles like a jeep, a trailer or even a boat. The winch can be mounted on any location of the vehicle provided that it serves the convenience of the owner. It also has a large weight pulling capacity on any terrain, and it is set to impress you with its power!

The key features are:

Accessibility:

The size of the winch is about 12 inches only which makes it super portable. Because of this reason, it makes it easy to carry it around and installing it on different vehicles at the same time. The winch also arrives with its  cable which is a 30ft steel cable. The cable is connected to a hook to make it safe too.

Ease of use:

This winch is equipped with its remote controller which helps the user operate the winch from a distance. It also comes with a crank in case the user wants to operate it manually.

Capacity:

Despite the small size of the winch, it has incredible power. This winch has power for pulling a weight of 6000 pounds. If in case the user wants to operate it from a boat, the maximum size of the boat should be 18 ft, and the maximum weight of the boat should be 5000 pounds.

Support:

Most users have complained about the unavailability of a detailed user manual with their devices, but this winch comes with all of them. Also including the parts and wiring that are required as well.

 

6.  WARN 26502 M8000 Winch – 8000 lbs Load Capacity

This winch is an outstanding value for trucks, sport utility vehicles and Jeeps. It features a 4.8 Horsepower series wound motor for a three-stage planetary gear set. Now, what does that mean to you and me? It means that this winch has a fast pull rate of eight feet per minute and a great duty cycle. All of these are packed in this portable winch that weighs about 74 pounds only. The M8000 is also available with an 80 foot or a 100-foot recovery line, and you can get to choose between a hose and a roller fairlead.

The main features are:

Design:

Because of its mobility, the winch is a super low profile and adds more to its portability. The control box is separated from the motor which means that it gives the winch a wide choice for mounting it on different locations depending on the user’s convenience.

Capacity:

The winch is 12 inches in size, and it arrives with a motor of a combined power of 4.8 Horsepower. This makes it possible for the winch to have a pulling capacity of 8000 pounds.

Efficiency:

Like most high-end winches available in the market, the gear set is equipped with a three-stage planetary gear as well. The brake system is also automatic with a direct drive cone feature.

Accessibility:

The Power can load in and out through a 100 ft of 5/16 inches of wire rope. As you can see, the motor is electrically generated.

 

7.  WARN 96810 VR 10 Winch

The Warn winch is a great recovery winch. If you want a standard duty winch that is efficient to the maximum, you might want to go for this model. The centre packs and the control packs are reloadable. It is run by an Albright contractor for reliability. It has a 7-year warranty but a lifetime of warranty for the mechanical parts. The model also has a standard ring gear on here as far as sliding ring gear for the engagement of the clutch. It comes with a steel fairlead. Most of the features are almost similar to the Warn M8000, so you will see a lot of similarities between them.

The key features are:

Design:

The design is the same as the Warn M8000. It is portable and lightweight and offers a massive range for mounting options.

Efficiency:

Like most high-end winches available in the market and like its counterparts, the gear set is equipped with a three-stage planetary gear as well. The brake system is also automatic with a direct drive cone feature.

Waterproof:

It is waterproof and can withstand about 2 ft of water. This attribute gives a longer life to this model as this prevents from easy corrosion of this device.

System:

It has the best-in-class gear and brake system. This allows for superior control of the motor and ease of use to the user.

 

8.  NEW Vortex Recovery Winch – 8000 lbs Load Capacity

The New vortex features great quality which is designed to provide only the most efficient service. This model has a dead pull capacity of 8000 pounds. This means that the rolling capacity or marine capacity would be more. It also comes with two remotes. One of them is a standard wired remote controller, and the other one is a bonus wireless remote controller. These come with warranties so anyone can buy them with confidence. This winch is an industrial recovery winch which performs much better than the travelling tool show type winches.

The key features are:

Capacity:

This winch has an overall strength of pulling a weight of 8000 pounds. This means that the motor has a large power capacity which is always a plus point when looking to purchase a winch.

Power:

The motor has a 5.5 horsepower with a power of 3.8 KW. This is a high magnitude performing motor, and it ensures only the best performance.

Remote controller:

As mentioned above, this product comes with two additional remote controllers. That is, one of them being wireless and the other being the traditional wired remote controller. This enables a user to perform the maximum amount of tasks even from a distance.

Service:

The company offers a full one year warranty on all mechanical and electrical parts.

 

9.  OFFROAD BOAR Synthetic Rope Waterproof Winch – 13000 lbs Load Capacity

The Offroad Boar is a state-of-the-art truck winch which is designed to be powerful and an efficient device. It is a functional and a reliable model to which users have no complaints to this date. It has a maximum capacity of pulling 13000 pounds of weight, and no winch has gotten more impressive than that.

The key features are:

Waterproof:

This device has acquired an IP67 rating of waterproof. This means that it is foolproof to all kinds of extreme weather.

System:

Like its high-end counterparts, this model includes a three gear planetary system as well.

Brake:

The brake system is an incredible marvel because it has automatic as well as the manual braking system. Talk about having choices!

Capacity:

As mentioned above, it has an impressive pulling capacity of 13000 pounds at once with its 85 ft of synthetic rope.

 

10  VIPER Winch 12000lb, Steel Cable, Wireless Remote, Integrated Contactor

The Viper Winch is made from the highest military grade materials. These have been certified and tested over various tests. Because of this thoroughness, there is an overbearing of the Viper winches, and they are shown to perform better under high pressure.

The key features are:

Construction:

The motor has an IP67 waterproof rating. The motor does not break under pressure due to this which is the most important point of all and can exceed limits when it is set to perform tasks.

Capacity:

After learning the impressive quality of the motor, it is only fair to assume that it has a large pulling capacity as well. This model does not fail in that department as well. A large job can be completed at one go since this winch has a capacity of pulling 12000 pounds worth of weight.

Construction:

The winch is made up of only the highest quality steel. Besides the motor having an integrated contractor, the motor is run on the permanent magnet as well.

Remotes:

This winch is completed by being accompanied by two controllers. One of them is an 11-inch onsite, remote controller, and the other one is a wireless controller to enable the user to operate the winch from a distance.

 

11.  Champion 4500 lbs ATV/UTV Wireless Winch Kit

This is an affordable winch which is designed for economic purposes. It has a two-year warranty on all parts. Besides the budget, this winch can do more than what you have paid for and overtime, there have been no complaints from users.

The key features are:

Convenience:

The Winch can be operated from a maximum distance of 50 miles through the wireless remote control that is provided along with the truck winch. Also, the winch automatically powers off on its own when the winch is not in use.

Efficiency:

The winch has a maximum pulling capacity of 4500 pounds, and the motor is powered with 1.6 horsepower.

Complete installation:

The winch includes a wireless remote controller along with an antenna, a channel for mounting, a roller fairlead and a wiring kit as well

Reliability:

The winch comes with a 2-year limited warranty and a lifetime of free technical support.

 

12.  Liteway 12 VDC Winch – 3500 lbs Load Capacity

This Liteway 12 VDC winch has an efficient motor that has the capacity for high usage. Users are technically impressed after purchasing and using this model. The waterproof feature and the pulling capacity is the main selling point of this truck winch. This is the absolute machine that is suitable for any rough jobs as users have claimed that they have never reverted to a different product ever since they have come across this model.

The key features are:

Protection:

Winches are usually used in rough terrains, so it is only fair that this winch comes with a motor that is sealed. This makes it completely resistant to mud, snow, rain and dust.

User-friendly:

The winch is completely easy to install even for beginners alike as it comes with a detailed manual.

Control:

The brake system is of superior quality so that it provides only the best control winch system. It also includes an additional winch mounting plate.

Reliability:

The motor is of high strength and is extremely reliable for pulling a massive weight of 3500 pounds.

 

Final Verdict

As a consumer, I would weigh in the pros and cons of owning a winch, and I would decide on one based on its versatility, long lasting life, cost and efficiency. I would recommend the Smittybilt 97495 XRC Winch and the Superwinch 1135220 Terra 35 Winch because it checks all the major points of a winch. Both the models have high horsepower and are waterproof. They are both cost-effective as they fall under the mid-range winches but can perform in the capacity of high-end winches.

Best Rated Truck Tool Boxes

Truck tool boxes play a pivotal role in maintaining your trucks. They are like the underdogs who are not given much thought in the beginning when everything is well and fine. But when misfortune happens in the middle of nowhere, or when an unexpected turn takes place on the job site, the truck toolbox is where you would want to turn to. Truck tool boxes should be included in the truck at all times because they act as the sole carrier for all the tools and parts that are required for any repairs or jobs. Besides that, it helps a truck owner organize the tools instead of dumping them on the back.

Reviews of the Best Truck Tool Boxes

**Below, you’ll find our more detailed reviews, but you can also click the links above to see current prices or read customer reviews on Amazon.

 

How Do Truck Tool Boxes Work?

Truck tool boxes are boxes that sit on the bed of your trucks.  These boxes will be used to store tools that will be required for repairs which can be for your job or your truck. It can also be used to store any valuable parts or simply for storing anything that requires safety.  Modern truck tool boxes come with all the amenities that one could think of. Every truck owner is unique, and each will have its requirements. But, I can assure you that there is one designed for each truck no matter how particular your machine is!

 

Things To Consider When Buying A Truck Tool Box

Before choosing one of the various choices available in the markets, there are some ground rules to remember.  And they are not strong rules, but fundamental ones. And I think that it is incredibly important that a first timer keeps these points to consider before committing oneself to a truck tool box.

Durability:

If you are driving a truck, then I will assume that you are somebody who is not into fragility. Since you will be involved with operating the truck on bumpy roads or participating in some gritty work, make sure you get a box that provides you with a sturdy built and is durable for all conditions.

Water-resistant:

This is one of the most important points. You may find yourself driving through some poor weather conditions, which usually involves the rain. And since most of the tools are made with metal, and considering that a truck tool box is mounted on the open back of the truck; it is advisable that you get a toolbox that is sealed from the inside once closed. This feature will make it resistant to water entering your toolbox and thus, saving them from all kinds of corrosion.

Anti-corrosive:

Since most of the tool boxes are constructed with metal, it is advisable that you get one that is made with an alloy like reinforced steel. There are other alternatives where the surface of the box is finished off with pain for making it resistant to corrosion as well. Or if you are not a fan of metals, there are truck tool boxes that are constructed with high-quality polymers.

Security:

The tool boxes in the trucks have always been an object of envy for thieves. So, lock systems have been added to most of the modern toolboxes. But do make sure to double check if you have one of them in the toolbox that you will be purchasing. Some come with automatic locks, and some come with manual locks. They have their pros and cons, but it depends on the user.

 

Top 12 Reviews Of The Best Truck Tool Boxes

Now that we have put that out of the day let us get to the more interesting part, and that is shopping. For this list, I have put together the best and the finest 12 toolboxes which are loved by many and ignored by few. They have been judged according to their durability, cost, quality, warranty, guarantee, design, compatibility, and popularity.

Now here are the 12 best truck tool boxes:

1.  Undercover SwingCase Truck Storage Tool Box SC100D

This model is perfect for those of you who own trucks that have a shorter truck bed since most truck tool boxes are known to take up space. So the debate of choosing a toolbox according to the size of the truck owner’s truck bed has always been an issue of a dilemma.  This is where the Undercover SC100D Swing Case Storage Box comes to the rescue. It is a unique design which is far from the traditional model of elongated rectangular truck tool boxes. The swing case can tuck in the right along the side of your truck bed and can be swung forward by pulling a lever when you need it. It is contoured in such a manner that it goes over the wheel of the truck so that when you swing it back, it is locked and secure.

The key features are:

Material and usability:

The box is made up of ABS plastic which is known for being anti-corrosive and impact resistant. This box can hold up to 75 pounds of materials in it.

Waterproof:

Besides the fact that it is made up of ABS plastic, the lid of the box is also sealed with rubber, which makes it resistant to water entering the toolbox. So it is perfectly safe to keep it out while driving out in the rain or your carwash.

Security:

The lid of the box comes with a latch which you can lock it. But a thief can always unhinge the toolbox from the side of your truck bed and carry it away. Therefore, space has been creating between the hinges to lock the box to your truck by picking up the lock and locking it in the given area. Pretty neat huh?

Anti-rust:

The pivot joints are made up of polymer bushings so that it avoids rubbing across the metal and causing it to rust.

 

2.  Buyers Products Black Poly All-Purpose Storage Chest

This is one of the models that can be used for many purposes.  Although the objective of this article is to review tool boxes, the adaptability of this box is the reason why it is included in this list. This box can be carried to job sites with all your tools in it. The container is designed and shaped to hold all of the necessary tools. Besides that, this box has the versatility of storing cold drinks, and it even has a dent on top of the lid to hold your cans. You can use it for many storage purposes as well.

The key features are:

Dimensions:

Its dimensions are 17.25″ x 19″/13.25″ x 44″/41.25″ which is a standard size for mounting it on your truck beds.

Material and durability:

It is made up of a polyethene material which is high in density. This fact makes the box extremely lightweight as well as resistant to dents.

Security:

The lid of the box is a moulded with steel and is double walled which can be hinged with a lock of your choice.

Anti-rust:

The fact that it is made up of steel also makes it resistant to corrosion as well.

 

3.  Montezuma Portable Tool Box – Truck Bed Storage Chest

This portable toolbox is for those who like to carry their own sets of metric and SAE tools wherever they go. Usually, it is a mess to move them around because of the number. But the Montezuma tool boxes have compartments and protrusions were you can keep and hang them respectively in order. Once the box is closed, the tools are maintained in position even during bumpy rides!

The key features are:

Accessibility:

The lid of the toolbox has a spring attached to it. This makes the lid spring upwards as the top is unlatched. This feature makes the toolkit easy for accessing tools in urgent situations.

Construction:

The box is made up of impressive 16 gauge steel where the seams are fully welded from the inside.

User-Friendly:

With a system that helps a user organize tools, it makes this an instant favourite because of its accessibility.

Water-resistant :

The box is fully sealed when it is latched. This would mean that the box is resistant to water, making it waterproof. So bumpy roads and rains should not be a concern to you when you carry this toolbox!

 

4.  UWS EC10473 69″ Crossover Truck Tool Box with Low Profile

UWS secure crossover toolboxes feature two locking twist handles with an inner connecting rod that provides ultimate security in an easy to operate design. The connecting lock rod is enclosed to prevent the contents of the box from bending or jamming the lock system. This box features an extra thick aluminium build and a patented foam filled lid which creates a stable structure to prevent bending or warping.

The key features are:

Accessibility:

The lid opens at 90-degree angle which makes it accessible for a single-handed operation. The box has a drop-in sliding tray with three compartments for organization and storing of small items like screwdrivers, nuts, and bolts, etc.

Functionality:

The inside of the box has integrated screwdriver holders that reinforce the structural integrity of the box. The box is also lined by removable heavy-duty carpeting by BedRug which protects your tools and minimizes dust. They are available with or without the optional integrated load anchoring lid rail.

Design:

These boxes come in bright aluminium and have a diamond tread finish or matte black powder coated aluminium diamond tread.

Size options:

They can be availed at different sizes to fit in any full-sized truck bed too.

 

5.  TRINITY TXKPGR-0502 Job Site Truck Tool Box

This is one of the tool boxes where you can practically store anything. It can be kept in the back of your truck, or you could use it as a box for storing units over a long period. This is designed to give you maximum and enhanced space for storing all your tools, even the ones that you find it too heavy or too big to carry around with you. Despite the size, this can be operated single-handedly which is a positive sign for those who usually like to go about their businesses solo.

The key features are:

Safety:

One of the features which completely sell this product is because this job site box has gas mounted lifts, which enables the user to close it and open it easily and single-handedly. It also plays a great role in protecting your hands by getting them out of the kid’s way.

Security:

An additional padlock can be added to the tamper proof lock system. So once you have locked it, you don’t have to worry about thieves trying to break in your box by tampering with the lock.

Durability and Design:

This box is constructed with the highest quality reinforced steel which makes it resistant to any corrosion and can also be used for all purposes including all heavy duty tasks. It comes in matte powder coated finish which makes it look sleek and stylish as well.

Functionality:

Besides using this box for job sites and for storing your tools in your truck, this model was also designed for fork hoisting and is crane accessible.

 

6.  Better Built 73210285 Truck Tool Box

It is a low profile, lightweight truck toolbox. It is designed to provide you with plenty of space for storing your tools which taking up an only a small amount of space on the bed of your truck. It has an easy installation mechanism which can be done in 15 minutes. It serves the purpose of heavy duty usage while being incredibly lightweight too. These characteristics make it easy for the user to carry the essentials required for any job without being overly burdensome.

The key features are:

Security:

This box comes with a double latch with a locking paddle. The double latch can be used for handling the box from one place to another.  It also provides the double paddle for extra security.

Construction:

This box is designed to be slim and low profile so that it takes up only a substantial amount of space. It takes up only 12 inches of your truck space while providing you with optimal storage space. It also has a low built profile which does not obstruct the back view of your truck.

Functionality:

The trunk lid has an auto lift mechanism. This means that despite the size of the lid, it allows a user to handle this toolbox single-handedly. And it results in easy access to the tools.

Design:

This box is made up of a rust-resistant material and comes in aluminium diamond tread design.

 

7.  Best Choice Products Aluminum Camper Tool Box

This model is a multi-purpose toolbox. It can be used for storing tools in the back of your truck, but that is not where the utility of this box ends. It can be used as a unit for storage for your trailer, garage or any other purpose. It is very lightweight which makes it portable and easy to transport. Overall, it has a nice aluminium design, and a lot of attention has been paid to its details. Let us have a look, shall we?

The key features are:

Security:

This toolbox comes with a lock system for which they have provided two keys. In case you lose one, you have nothing to fear as a spare has been provided by the company.

Design:

The box has two aluminium handles on the sides that are bolted to the box. The handles have a spring loaded design which area rubberized material. This helps in carrying it easily without any additional strain on the hands.

Spacious:

The inside of the box has no unexpected turns and bends which makes it incredibly spacious for storing all your tools and necessities.

Style:

It looks attractive because of the chrome matte finish. Not only does it look attractive but it is anti-corrosive as well.

 

8.  Dee Zee Red Label Utility Chest DZ8546B

This is also another lightweight toolbox which has an aluminium finish and a sleek design. It can be permanently mounted on the back of your truck. The toolbox has a rubber covering at the bottom which makes it extra easy to slide it in and out of your truck bed. Overall, this model is easy to use and a very accessible product. And it is designed to give maximum advantage to its utility for the user.

The key features are:

Sliding Tray:

The toolbox has a sliding tray on the top which is useful is compartmentalizing the tools in the box. The tray can be slid from one point to another depending on your convenience. This sliding tray provides the optimal way of storing your tools according to their sizes and importance.

User-friendly:

It has an easy to use latch, which opens the lid with a slight press to the latch.  There is a keyhole beside the latch which is used for locking the toolbox when not in use or when you are not around.

Design:

It has a powder coat which has a protective glossy sheen to it. This glossy look adds a luxurious look to it as well.

Water resistant:

The insides of the box are double sealed and fully welded when closed. This makes the box entirely resistant to water which is a saving grace in protecting your tools from getting corroded.

 

9.  Buyers Products Black Steel Underbody Truck Tool Box

This model has a heavy duty design by looks which serves the purpose of carrying all your tools in a place and keeping them safe for future uses. It is highly resistant to external factors, and it has a long-lasting shelf life. This makes the model highly durable as well as cost-effective. It has a design which makes it user-friendly and easy for the users to operate on it single-handedly. It is ultra durable and makes the back of your truck look more stylish than ever.

The key features are:

Construction:

It has a single latch. This latch can be operated by a slight press which automatically opens the lid of the box. In a way, it provides easy access to the tools in the box. The box is also constructed from 14 high-quality gauge steel, and this is the reason why this box has a durable exterior finish.

Resistance:

The box is resistant to water as well as 100% resistant to rust and any corrosion because of the material that it is constructed from.

Security:

The single latch is provided with a lock system which secures the lid of the box. The steel also makes it impossible for the thieves to break into the box.

Design:

It is coated with black powder and has a matte finish and is built for long-lasting use with a gasket system that is waterproof and hinges constructed with stainless steel.

 

10.  UWS TBSD-69-SL-LP Black Single Lid Slim Line Aluminum Toolbox with Beveled Insulated Lid

This model has a lid that is fully foamed. The toolbox is known for its walls which are rigid to prevent it from getting dents or bends from the outer aluminium layers. This is one of the qualities which have made this a demanded product from customers who are in the business of rough and tough jobs.

The key features are:

Security:

The locks are made up of stainless steel and are highly resistant to any break-ins by thieves and are super secure.

Convenience:

The sliding tray provides the compartments that are helpful in storing small tools and makes it convenient and accessible to the user. It also has two tool trays which can be used for holding screwdrivers.

Construction:

The outer layer of the box is made up of 0.063-inch aluminium, and it is designed to lift and store heavy tools and makes me ultra-resistant to water as well.

Single handed operation:

It is equipped with struts which close the lid automatically as you give it a gentle pull.

 

11.  Lund Aluminum Flush Mount Single Lid Truck Tool Box – Diamond Plated – 79460T

This toolbox satisfies the storage capacity that everyone needs. It is cost-effective, and it can be used to store all kind of tools that are required for repairs and jobs. This is a highly durable product and can take any number of beatings on a long bumpy road and still emerge out of it undefeated. It is sturdy and can be placed in the back of your truck without danger of damaging it from external factors:

The key features are:

Dimension:

The box stands in a 60-inch height which is attributed to its low profile. This attribute makes the box occupy only a small portion of the truck’s space as well as provide the utility of a first-class toolbox.

Construction:

This truck tool box is constructed with 0.06-inch aluminium, and as I mentioned earlier, this model can withstand any harm from external factors.

Style:

It has a black matte finish to it with diamond treads. So, despite the beatings that this box takes, it can still look flawless.

Easy access:

The paddles are on the sides of the box which are made up of stainless steel. The side paddles make it super easy for carrying it ad mounting it on any surface.

 

12.  Jobox Aluminum Single Lid Super Deep Crossover Truck Tool Box

The design of this truck tool box complement’s the truck’s bed. It is a versatile toolbox which not only enhances your truck but provides you with the overall purpose of storing and organizing all the tools that you require. It is high in strength, and if you are looking for a portable yet a sturdy truck tool box, this is the one for you.

The key features are:

Construction:

The inner part of the box is lined with foam insulation to provide maximum rigidity from the outside wear and tear to the box. The body is made up of reinforced steel giving it structure and high strength to the overall body of the truck tool box. It comes with compartments, so this can act as a positive point for those who have a knack for organizing tools.

Security:

The gear has an automatic lock system which enables you to secure the toolbox every time you open it and close it. With this system, it gives no room for human errors.

Organizing:

As I have pointed out earlier, this toolbox comes with four sliding trays that can be used for organizing the various tools of different sizes and shapes.

Corrosion proof:

The stainless material seals the container on all sides which makes it moisture proof. This helps to keep the tools from getting into contact with moisture leaving it free from corrosion.

 

Final Verdict

The list provides the pros and cons of owning each toolbox. And I did mention in the beginning that there is one for everyone. But if I had to advise on purchasing one for your truck, I would exclusively recommend the Undercover SwingCase Truck Storage Tool Box because of the material it is constructed from and also it does not need a large space for setting it up on the truck bed. Secondly, I would also recommend the Buyers Products Black Poly All-Purpose Storage Chest, solely because of the reason that it is super versatile. And also because I am a person that likes to get value for my money, the fact that this box can be used for a variety of purposes as well as a decisive criterion for purchasing this toolbox.

Best Rated Truck GPS

Truck GPS is one of the essential accessories to have in your truck in today’s time. A truck GPS keeps you and the vehicle safe from getting into any accidents while you get confused searching for the right address or the right road to turn. It also helps you travel through the shortest possible route and maximizes the productivity. Moreover, you will have a comprehensive mapping software which you can use to find your destination without you getting lost. Read more

Best Retractable Truck Bed Tonneau Cover

Generally, many of you looking the best quality retractable truck bed cover in the market why because truck bed cover is most important to protect the cargo safely. The people those who are looking the convenience and easy storage truck cover in the market they can use the retractable tonneau bed cover. It provides the high-level security to your payload and it can able to solve the weather conditions also. Read more

Best Spray In Bedliners

If you’d like to line the truck bed of your pickup truck, many options are available to you. You can simply buy a tonneau cover and install it; such models come in a variety of materials and may be rigid, or on the other hand supple enough to fold easily. Other models give you the possibility of rolling them onto your truck, allowing you to cover up any hanging space. However, one other possible option—which will be the subject of this article—is the DIY spray-in bed liner. We’re going to review how they work, explain some characteristics you’ll need to look out for when buying one, and examine some possible models that you can purchase. Read more

Best Tri Fold Tonneau Covers

You’ve probably heard that the truck bed covers are becoming popular among all the truck bed owners. This is because it’s used to protect your cargo from the harsh weather and as well as from the thieves. Along with this feature, it also helps you in saving your fuel economy. If you really want to protect your belongings inside the truck bed, then you should buy the truck bed tonneau covers. Moreover, this tri-fold truck bed tonneau cover provides more convenient when comparing to the regular truck covers. Read this article before jumping into the purchasing of truck bed covers. Here, you can read the features of the various superior tonneau covers which help you to select the appropriate truck cover at a reasonable price. Read more

Best Roll Up Tonneau Covers

These days using the truck is becoming more common. This is because it helps to keep more luggage in it. With this, you can carry heavy duty materials in an easy manner. In order to maintain its durability, you need to protect it properly. How can you do it? The only solution is to buy the best roll-up tonneau covers. Yes, these types of covers come with several features to make your task easy. If you are having the roll-up cover, then you no need to worry about the unused parts of your truck. It will take care about your truck and will help to extend your good looking trucks lifetime. Read more

Best Roll On Bedliners

The roll on bed liners is a great option for your pickup trucks. They are meant for protecting the bed of your pickup truck, and, depending on the model, will also often protect the items inside it as well. Thus, you won’t need to worry about your items damaging your pickup–or, for that matter, your pickup from damaging your items. Bed liners are made from a variety of materials, including in particular polyurethane, and, again depending on the model, can be applied via spraying, rolling, or brushing. Most of the time, the truck bed liner kit will include Read more